...

Overview

To test documents, you must go through the steps of creating a job, building a quote, and generating a contract.

Note: In order to generate a document for testing, EverBright requires that qualification is approved and legal contacts and legal addresses are filled out.

Step 1: Log in to OnBoard for Testing

Testing documents must be done in OnBoard, our testing site. Log in to OnBoard at:

...

You will use the same credentials (username and password) as you use for the live Engine site.

Step 2: Create a Job, Quote, and Contract

Go through the normal steps you would follow to create a project:

1. Enter an Address How do I enter an address?

2. Enter a Contact How do I enter contact information?

3. Enter Usage information (optional for testing) How do I enter utility and usage information?

4. Create a Project design (optional for testing) How do I add a project?

5. Generate a Quote How do I create a quote?

Step 3: Approve Credit and Qual for the Product

After going through the steps to create the job as listed in Step 2:

...

• When done it should look like this:

  

Step 4: Add Legal Contacts and Address

• Remain on the Qualification phase

• Click into where it says Name & Address in the right column. Then Click +Add
  

  

...

• Click on +Add on where it says LEGAL ADDRESS

  

• Fill out an address that will allow for the proper testing of the document. For instance, if a document is only supposed to apply to a specific state, make sure to enter an address in that state. Then click Create.
  

  

Step 5: Generate and Review the Document

• Go to Contract phase and click + Add Quote to add a quote and generate a contract.

• Click on the Preview link to simply review the document
  OR

• If you want to test the workflow as well as the document (for instance Homeowner > Sales Representative > Contractor) click the Send E-Sign button to send the actual document to all listed parties. Be sure to notify all signers that this is a test and to sign it as though it were real.

...

Step 6: Submit Approval or Changes

Once your document has been tested, reply to the document testing email notification you received from us with your approval or any changes needed. If you request additional changes, we will make them and send you another notification to re-test the document in OnBoard. After we receive your approval, we will upload the document to our live Engine environment.