This article refers to welcome calls for the majority of our deals. However some will follow the SOP /wiki/spaces/SS/pages/2548432903. In these cases, the ticket itself will contain a link to that SOP, rather than this one.
...
EverBright homeowners can call our Welcome Call support line (833-830-0475, Option 1).
When a client dials this number they will have the option, either to complete their welcome call (option 1) or speak to someone on the EverBright Deal Processing team (option 2).
The Homeowner should only be dialing the option to complete the Welcome Call
IVR recording: “Hello, thank you for calling EverBright. Press 1 to complete a Welcome Call. Press 2 if you have a question about credit or title. If the user presses 1: We appreciate you reaching out to complete this necessary step in the process of going solar. Before we begin, please be sure to have a copy of your Welcome Call questions with you so that you may follow along.”the option, either to complete their welcome call or speak to someone on the EverBright Deal Processing team.
The Homeowner should only be dialing the option to complete the Welcome Call
IVR recording:
How to handle inbound calls: Make sure Jabber is open, your headset is on, and you’re ready for calls.
1.) Make sure you’re logged into the platform(EverBright LLC as EverBright Admin) and ready to pull up specific jobs. http://engine.goeverbright.com
...
2.) Answer incoming call: Hello - Thank you for calling EverBright. This is [Agent’s first Name], how may I assist you today”?
The caller confirms that they wish to complete their welcome call
3.)“Thank you! I am happy to help you complete your welcome call”. Do you have your EverBright financial contract available to refer to during our call?
If the caller does not, please follow the instructions here to resend them their docusign email - from there, they can retrieve their contract from Docusign. This may take a few minutes.
If they say they have their contract, or have successfully retrieved it, then proceed:
So that I can pull up your account, please provide me your full name”?
Navigate to pipeline - in the search bar, enter the homeowner’s name. Once you find the job, verify that the name and address matches the information provided by the homeowner
...
Verify that the name and address match the information provided by the homeowner
“Please verify the property address where the solar system will be installed”
If correct, then open the job
...
5.)Then start the welcome call:
“The goal of this “Welcome Call” is to ensure that you understand the details of your solar financing agreement. “
Welcome Call page is the last page in the contract
6.) If the answer to this question is “YES”, proceed with the following script:
Great! Ok, the following questions will require an answer of either a yes or no to proceed to the next question…”
“Let’s go ahead and get started”
Note: You will then read the questions directly from the homeowner’s contract page “Welcome Call Checklist” - Questions must be read exactly as how they appear in the contract.
Homeowners should answer “YES” or “That is correct” or “I agree” or other acceptable affirmations to all questions - but do not lead them to a specific answer. However, if they don’t know where the contract ID # is, you can refer them to the upper right side of any page of their contract to find that number.
...
7.) Once finished with all the questions, then close the call.
“Thank you, [Client’s Name]. That concludes the “Welcome Call” and we’ll notify your installer. We hope that you have a great rest of your day!”
Rep should now complete all the steps to process the completed welcome call (skip to instructions below - add link)
...
Once the homeowner answers, refer to the script below:
“Hello, good afternoon this is (Representative Name) calling from EverBright. Am I speaking with (Customer Name)?..... How are you doing this (morning/afternoon)? …. We are calling to complete your Welcome Call. The goal of this call is to ensure that you understand the details of your solar financing agreement. Do you have your EverBright contract available to refer to during our call?
If the caller does not, please follow the instructions here to resend them their docusign email - from there, they can retrieve their contract from Docusign. This may take a few minutes.
If they say they have their contract, or have successfully retrieved it, then proceed:
Great! Ok, the following questions will require an answer of either a yes or no to proceed to the next question…”
Note: You will then read the questions directly from the homeowner’s contract page “Welcome Call Checklist”- Questions must be read exactly as how they appear in the contract.
Homeowners should answer “YES” or “That is correct” or “I agree” or other acceptable affirmations to all questions - but do not lead them to a specific answer. However, if they don’t know where the contract ID # is, you can refer them to the upper right side of any page of their contract to find that number.
| Info |
|---|
If the following information is incorrect on the WC checklist: Phone number - The agent should ask for the correct phone number and update it in the qualification phase when call is complete. The call can be deemed successful. Instructions below Other contact information - (misspelled name, address, unit number) the call can be deemed successful if the installer completes an NCCO. Instructions below If an email address is incorrect - the call cannot be considered successful. The installer would need to cancel the workflow, update the email address in qualification phase, and then they'd need to resign. |
“Thank you, (Client Name). That concludes the Welcome Call. We will be reaching out to your (contractor/sales rep) to let them know that we completed this necessary step in the process of going solar. Have a great rest of your day”.
3. How to process welcome calls
...
If the Client answers “NO” to a question that requires a yes to proceed, then they have failed the “Welcome call”
We will tell the homeowner that we are not able to complete the Welcome Call and that the Installer should be reaching out to them to clarify any details.
At this point, the EverBright Support Representative will leave a note within the Customer’s Project in EverBright. The note will read “The client failed the “Welcome Call” on (question#), please reach out to the client to review this question along with any additional questions they may have regarding their contract or the “Welcome Call” questions
Next, open a new or the existing ticket in In JIRA, with the following fields:
Reporter: Installer/Contractor’s email
Request Type: Welcome Call
Label: Welcome Call
Support Channel: Phone, Email
Write a note to the installer with details on the failed welcome call - i.e. which questions they answered incorrectly, or anything else notable about the call.
Hello,
This email is to notify you that the Welcome Call for [customer name and address] was rejected for the following question, [question that failed]. Please review the Welcome Call questions with the homeowner to ensure that they have a clear understanding of the terms of their solar agreement.
Please contact us if you have any questions at 833-830-0475 option 1 or reply to this email.
4. Updating the homeowner’s phone number
...
The Welcome call checklist does not update when an NCCO is generated. However, support will still complete the welcome call and upload it to the platform
Leave a note in the Milestone Feed within the project: “Welcome call completed using the original welcome call checklist”
Next, open a new or the existing ticket in JIRA with the following fields:
Reporter: Installer/Contractor’s email
Request Type: Welcome Call
Label: Welcome Call
Support Channel: Phone, Email
Write a note to the installer informing them that they need to complete a NCCO and update the homeowner’s information
Hello,
This email is to notify you that the Welcome Call for [customer name and address] was completed, however the customer’s [enter incorrect information (i.e. name was misspelled)]. Please complete a No Cost Change Order (NCCO) to correct the information.
Please contact us if you have any questions at 833-830-0475 option 1 or reply to this email.
For RIC (EverOwn, EverOwn Plus) agreements, the installer will also need to complete a new RIC assignment form after the NCCO. The form is located inside the NCCO task
6. If an update to email address is needed
We will tell the homeowner that we are not able to complete the Welcome Call and that the Installer should be reaching out to them to clarify any details.
At this point, the EverBright Support Representative will leave a note within the Customer’s Project in EverBright. The note will read “The client failed the “Welcome Call” on due to the email being incorrect, please cancel the workflow, re-quote, and re-sign the contract.”
Next, open a new or the existing ticket in In JIRA, with the following fields:
Reporter: Installer/Contractor’s email
Request Type: Welcome Call
Label: Welcome Call
Support Channel: Phone, Email
Write a note to the installer with details on the failed welcome call - i.e. which questions they answered incorrectly, or anything else notable about the call.
Hello,
This email is to notify you that the Welcome Call for [customer name and address] was rejected due to the homeowner’s email being incorrect. Please cancel the workflow, re-quote, and re-sign the contract.”
Please contact us if you have any questions at 833-830-0475 option 1 or reply to this email.
7. Reference - MiaRec recording downloads
...
“Hi (customer name) this is (agent's name) from EverBright Homeowner Support. We are calling to conduct your Welcome Call. Please give us a call back at 833-830-0475, option 1. We are open every day from 6am to 8pm Pacific Time. We look forward to hearing from you - and welcome to EverBright!"
...
E-mail to installer: Hello (Installer name). We have not been able to speak with (homeowner name) to complete the required welcome call. Please contact the homeowner and advise to call us at 833.830.0475 Option 1 to complete the call. We will close this ticket if we are not able to conduct the call with the homeowner within 48 hours. We are available every day of the week from 9am to 11pm Eastern Time.
...
13. Spanish Welcome Call Requests
Currently, EverBright does not accept Welcome Calls in Spanish or 3rd party translations.
Scenario: Inbound or outbound call from/ homeowner that requests Welcome call in Spanish
...
Read the following script to the homeowner:
Script
“Currently, EverBright does not conduct welcome calls in Spanish. To move forward with your agreement, we would need to conduct your welcome call in English. Would you like to continue in English?”
Homeowner says yes: Follow Welcome call SOP
...