...
Once installation is complete and PTO received, homeowners RIC (EverBright EverOwn and EverOwn Plus) customers can monitor the system production by setting up system monitoring through their inverter manufacturer’s website. This feature is optional for RIC 1.0 customers and required for RIC 2.0 customers.
After the solar system installation is complete the installer has to set up the homeowner’s system for monitoring.
The owner of the system (homeowner) needs to grant Everbright access to the project in the Enphase portal. The homeowner typically receives an email from Enphase requesting access. The installer should coordinate with the homeowner to have access to granted to EverBright. Note: Omnidian should NOT be added as an owner as RIC’s are not managed by Omnidian:
...
NOTE (ENPHASE ONLY): If the Homeowner does not receive the email to approve EverBright’s access, share the link below with them and when they open the link, it will grant access to EB:
https://enlighten.enphaseenergy.com/account/confirm_access/ff906aac1b60e5ba351c611278
For Enlighten Access (Enphase)
https://www4.enphase.com/en-in/homeowners/welcome/monitoring
...
The username is the email address on the contract. The homeowner will be sent a temporary password that will need to be reset when first logging on.
For SolarEdge Access:
https://www.solaredge.com/sites/default/files/solaredge-monitoring-portal-user-guide.pdf
...