Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 6 Current »

Background: Support agents might receive frequent questions and challenges reported by homeowners during the MyEverbright account setup process. This article will guide you on how to handle these types of inquiries

Table of Content:

Steps for Account Setup:

Step

Action

1

  • Homeowner will contact you about setting up their account

2

  • Explain to the customer that after signing the agreement, they should have received an email with a link to register for their MyEverbright Account

image-20241209-153744.png

If they Cannot find the Email:

  • Instruct them to check their spam or junk folder

  • If still not found; confirm their email address matches the one registered with the agreement

    • If needed; guide them to update their email address with MyEverBright

If the email is Found:

Go to Step 3

3

  • The Email link will take them to register via the web app, or prompt them to download the MyEverbright mobile app from the Google Play Store (Android) or Apple App Store (IOS)

  • Once the Homeowner accesses the app or web portal:

  1. Ask them to tap under “Set up your Account”

    1. Then enter their Email address

Tell them they will receive a 2FA code at that Email Address

image-20241209-154047.pngimage-20241209-154212.png

  1. Guide them through entering the Two Factor Authentication (2FA) code by explaining that they will see a screen asking for a code and to please check their email and enter the code within 10 minutes

  • If they didn’t receive the code:

    • Tap “Didn’t Receive a Code?” and click “Resend” to request a new one

image-20241209-154253.png

If they request the code more than 5 times in 10 minutes they will need to wait 10 minutes before trying again

image-20241209-154322.png

4

  • After successfully verigying their 2FA Code, provide the following instructions:

Password should include uppercase and lowercase letters, numbers and special characters (Avoid common words or patterns)

Only Passwords rated with 3-4 bars for strength will be accepter. Adjust the password if needed o meet this standard

image-20241209-154402.png

Reporting Homeowner Issues:

If after following the previous steps the homeowner continues to experience issues, follow these steps:

Step

Action

1

  • Gather the following details from the Homeowner:

  • Customer Name

  • Email Address

  • Platform Used (Web App or Mobile App)

  • Device Details (For Mobile App)

2

  • Go to Slack and locate the Channel named as (#Homeowner-Support) and include the following template based on the information collected above:

  • Customer Name:

    • Full Name

  • Email Address:

    • Homeowner’s Email

  • Platform Used:

    • Web/Web Browser on mobile device/ Mobile App

  • Device Details (For Mobile App)

    • Android or IOS

    • App Version

  • Issue Description:

    • Provide detailed description of the issue

3

  • Create a Case in SalesForce and assign to the Back Office Team

    • Then Stop

Make sure to include the same template in the case feed stating as well if the issue has been posted in Slack too

(For Back Office Only)

  • Once the slack issue has been solved:

  • Email the Homeowner providing details on the resolution

    • Then Close the Case and Stop

How to Guide a User to Find App Version:

Step

Action

1

  • Open the MyEverbright app

2

  • Tap the “Person Icon” in the upper right corner to navigate to “My Account”

3

  • Locate the app version listed below the logout button (e.g. “App Version 12.15”)

2FA Code sent to wrong page when using Email App Browser:

Support might get questions from customers about problems with the 2FA code

This happens when a homeowner clicks a link to create an Everbright account from their email app (like Gmail) Instead of opening the link in their usual web browser (like Safari or Chrome)

This causes the 2FA code to go to a different page, and the customer struggles to continue the 2FA process.

Step

Action

1

  • Explain to the customer that this is happening because some Email Apps open links in their internal browser

2

  • To fix this; Open the Email from the Email App (e.g Gmail) and click on the link

It will automatically open within the Same Email App’s instead of the default browser (Like Safari or Chrome)

3

  • Look for the option to open in the direct browser (Usually at the top or bottom of the screen)

    • This may appear as a small pop-up or an icon (Three dots or the browser logo)

image-20241219-144222.png

This image is for illustrative purposes only. The email content shown here is not what customers will see.

4

  • It will ask you to open in the selected browser (e.g: Open in Safari)

5

  • Once in Chrome, they can proceed with the 2FA process without losing their place

They can return to the Gmail App anytime, and it won’t redirect them away from the website

6

  • Once the homeowner has followed the steps, confirm they can now complete the 2FA process

    • If they are still having trouble, ask them to double-check that they are opening the link in their default browser

7

  • Finally; Simply Remind to the homeowner that for the best experience, please always open these links from emails in their direct browser, not within their email app’s internal browser.

    • This will help them avoid any issues with the 2 Factor Authentication Process

  • No labels